View LTM170E8-L01_5975303.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval to : date : 2005-02-17 approved by : any modification of spec is not allowed without sec's permission. 4fojps .bobhfs y.d. jo prepared by : lcd business technical customer service team samsung electronics co . , ltd. samsung tft-lcd model no .: LTM170E8-L01 www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval contents revision history -------------------------- (3) general descripti on -------------------------- (4) 1. absolute maximum rat ings -------------------------- (5) 1.1 absolute ratings of environment 1.2 electrical absolute ratings 2. optical characteristics -------------------------- (7) 3. electrical characteristics -------------------------- (12) 3.1 tft lcd module 3.2 back-light unit 4. block diagram -------------------------- (16) 4.1 tft lcd module 4.2 back-light unit 5. input terminal pin assignment -------------------------- (17) 5.1 input signal & power 5.2 lvds interface (1) 5.3 lvds interface (2) 5.4 back-light unit 5.5 input signals, basic display colors and gray scale of each color 6. interface timing -------------------------- (24) 6.1 timing parameters (de only mode) 6.2 timing diagrams of interface signal (de only mode) 6.3 power on/off sequence 6.4 v dd power dip condition 6.5 lvds input characteristics 7. outline dimension -------------------------- (30) 8. reliability test -------------------------- (32) 9. packing -------------------------- (33) 10. marking & others -------------------------- (34) 11. inspection criteria -------------------------- (36) 12. general precaution -------------------------- (37) 12.1 handling 12.2 storage 12.3 operation 12.4 others www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval * revision history date rev. no page summary feb. 17, 2005 e00 all approval specification of LTM170E8-L01 model was issued first. www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval general description * description LTM170E8-L01 is a color active matrix tft (thin film transistor) liquid crystal display (lcd) that uses amorphous silicon tfts as switching devices. this model is composed of a tft lcd panel, a driver circuit and a back-light system. the resolution of a 17.0" contains 1280 x 1024 pixels and can display up to 16.7 millions colors with wide viewing angles of 89 in all directions. (vertical viewing angle : 178, horizontal viewing angle : 178) * features - high contrast ratio, high aperture structure - pva(plus viewing angle) mode - wide viewing angle & high speed response - sxga(1280 x 1024 pixels) resolution - low power consumption - 2 dual ccfts(cold cathode fluorescent tube) - de (data enable) mode - lvds (low voltage differential signaling) interface (2pixel/clock) - compact size design - pb-free configuration * applications workstation & desktop monitors display terminals for av application products monitors for industrial machine * if the module is used to other applications besides the above, please contact sec in advance. * general information items specification unit note display area 337.92(h) x 270.336(v) mm driver element a-si tft active matrix display colors 16.7m colors number of pixels 1280 x 1024 pixel pixel arrangement rgb vertical stripe pixel pitch 0.264(h) x 0.264(w) mm display mode normally black surface treatment haze 44% , hard-coating (3h) www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval * mechanical information item min. typ. max. note module size horizontal(h) 354.5 354.9 355.4 mm vertical(v) 289.8 290.3 290.8 mm depth(d) - - 13.3 mm weight - - 1,700 g 1. absolute maximum ratings 1.1 absolute ratings of environment item symbol min. max. unit note storage temperature t stg -20 65 ? (1) operating temperature (glass surface temperature) t opr 0 50 ? (1) shock ( non - operating ) snop - 50 g (2),(4) vibration ( non - operating ) vnop - 1.5 g (3),(4) note (1) temperature and relative humidity range are shown in the figure below. 90 % rh max. ( 40 c ta ) maximum wet-bulb temperature at 39 c or less. (ta > 40 c) no condensation. (2) 11ms, sine wave, one time for x, y, z axis (3) 10-300 hz, sweep rate 10min, 30min for x,y,z axis (4) at vibration and shock test, the fixture which holds the module to be tested has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. 0 20 40 60 80 100 -40 -20 0 20 40 60 80 5 90 operating range storage range relative humidity ( %rh) temperature ( o c) (40 ? ,90%) (50 ? , 50.4%) (65 ? , 27.7%) (-20 ? ,5%) www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 1.2 electrical absolute ratings (1) tft lcd module (vss = gnd = 0 v) item symbol min. max. unit note power supply voltage v dd vss-0.5 6.5 v (1) note (1) within ta ( 25 2 c) (2) back-light unit ( ta = 25 2c) item symbol min. max. unit. note lamp current i l 3.0 7.0 marms (1),(2) lamp frequency f l 40 80 khz (1) note (1) permanent damage to the device may occur if maximum values are exceeded. functional operation should be restricted to the conditions described under normal operating conditions. (2) specified values are for a single lamp. (refer to the note (1) in the page 14 for further information). www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 2. optical characteristics the following items are measured under stable conditions. the optical characteristics should be measured in a dark room or equivalent state with the methods shown in note (1). measuring equipment : topcon bm-5a, bm-7, photo research pr650 eldim ez-contrast (inverter freq. : 50khz) * ta = 25 2 c, v dd =5v, fv= 60hz, f dclk =54mhz, i l =6.5ma rms item symbol condition min. typ. max. unit note contrast ratio (center of screen) c/r normal =0 =0 viewing angle 800 1500 - (3) bm-5a response time rising tr - 15 20 msec (5) bm-7 falling tf - 10 15 luminance of white (center of screen) y l 240 280 - cd/m2 (6) bm-5a color chromaticity (cie 1931) red rx 0.610 0.640 0.670 (7) pr650 ry 0.300 0.330 0.360 green gx 0.270 0.300 0.330 gy 0.570 0.600 0.630 blue bx 0.120 0.150 0.180 by 0.030 0.060 0.090 white wx 0.283 0.313 0.343 wy 0.299 0.329 0.359 color chromaticity (cie 1976) red ru' - 0.451 - rv' - 0.523 - green gu' - 0.125 - gv' - 0.563 - blue bu' - 0.175 - bv' - 0.158 - white wu' - 0.198 - wv' - 0.468 - color grayscale linearity white ? u'v' - - 0.02 (9) pr650 viewing angle hor. l cr 10 80 89 - degrees (8) bm-5a r 80 89 - ver. h 80 89 - l 80 89 - hor. l cr 100 - 75 - r - 75 - ver. h - 65 - l - 65 - brightness uniformity (9 points) buni - - 25 % (4) bm-5a www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval note (1) test equipment setup the measurement should be executed in a stable, windless and dark room between 30min and 40min after lighting the back-light at the given temperature for stabilization of the back-light. this should be measured in the center of screen. single lamp current : 6.5ma (refer to the note(1) in the page 14 for more information.) environment condition : ta = 25 2 c photodetector photodetector field bm-5a 2 ? bm-7 2 ? pr650 1 ? lcd panel tft - lcd module the center of the screen bm-5a : 40 y bm-7 : 50 y pr650 : 50 y field optical measuring equipment setup note (2) definition of test point : test point active area 7 4 1 2 5 8 9 6 3 102 512 922 128 640 1152 www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval note (3) definition of contrast ratio (c/r) : ratio of gray max (gmax) & gray min (gmin) at the center point of the panel cr g g = max min gmax : luminance with all pixels white gmin : luminance with all pixels black note (4) definition of 9 points brightness uniformity buni bb b =? ? 100 (max min) max bmax : maximum brightness bmin : minimum brightness note (5) definition of response time : sum of tr, tf display data white(tft on) black(tft off) black(tft off) optical response 100% 90% 10% 0% t r t f time note (6) definition of luminance of white : luminance of white at center point www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval note (7) definition of color chromaticity (cie 1931, cie 1976) color coordinate of red, green, blue & white at center point note (8) definition of viewing angle : viewing angle range (cr 10, cr 100) 6 o?clock direction normal line l r h l 12 o?clock direction r =90 o l =90 o = 0 o , x x? y? y = 0 o h = 90 o l = 90 o www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval note (9) color grayscale linearity y test image : 100% full white pattern with a test pattern as below t test pattern : squares, 40mm by 40mm in size, filled with 255, 225, 195, 165, 135 and 105 grays steps should be arranged at the center of the screen. 40mm 40mm 40mm 40mm ? test method . 1st gray step : move a square of 255 gray level should be moved into the center of the screen and measure luminance and u' and v' coordinates. . next gray step : move a 225 gray square into the center and measure both luminance and coordinates, too. . then, repeat the same procedure for gray steps 195, 165- 135 and 105. test evaluation where a, b : 2 gray levels found to have the largest color differences between them i.e. get the largest u' and v' of each 6 pairs of u' and v' and calculate the u'v'. www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 3. electrical characteristics 3.1 tft lcd module ta = 25 c item symbol min. typ. max. unit note voltage of power supply v dd 4.5 5.0 5.5 v (1) interface type lvds ds90c383/385/387 ds90c386 pair current of power supply (a) black i dd - 700 - ma (2),(3) (b) white - 800 - ma (c) dot - 1000 1250 ma vsync frequency f v 55 60 76 hz hsync frequency f h 56.7 64 81.1 khz main frequency f dclk 38.1 54 68.4 mhz rush current i rush - - 4.0 a (4) note (1) the connector for display data & timing signal should be connected.(vss=0v) (2) f v =75hz, f dclk = 67.5mhz, v dd = 5.0v, dc current. (3) power dissipation check pattern(lcd module only) a) black pattern b) white pattern c) dot pattern rgb rgb rgb rgb rg rgb rgb b rgbr rgbrgbrgb rgbrgbrgb rgbrgbrgb rgbrgbrg gbrgb rgbr rgbrgr rgb rgb rgb rgb r rgb www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval (4) measurement conditions 5v 12v v dd ( lcd input) control signal (high to low) m2 2sk1399 m1 2sk1059 r2 1k c2 10000pf c3 1uf r3 47k r1 47k fuse c1 1uf control signal : high(+5v) low(ground) all signal lines to panel, except for power 5v : ground the rising time of supplied voltage is controlled to 470us by r3 and c2 value. www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 3.2 back-light unit the back-light system is an edge - lighting type with 2 dual ccfts ( cold cathode fluorescent tube ) the characteristics of two dual lamps are shown in the following tables. ta=25 2c item symbol min. typ. max. unit note lamp current i l 3.0 6.5 7.0 marms (1) lamp voltage v l - 630 - vrms lamp frequency f l 40 - 60 khz (2) operating life time hr 50,000 - - hour (3) inverter waveform asymmetry rate w asy - - 10 % (6) distortion rate w dis - - 2 2 ? 10 % startup voltage vs - - 0 ? : 1,580 vrms (4) 25 ? : 1,210 note) the wave form of the inverter output voltage must be area symmetric and the design of the inverter must have specifica tions for the modularized lamp. the performance of the back-light, for example lif e time or brightness, is much influenced by the characteristics of the dc-ac inverter for the lamp. so all the parameters of an inverter should be carefully designed so as not to produce too much leakage current from high-voltage output of the inverter. when you design or order the inverter, please make sure that a poor lighting caused by the mismatch of the back-light and the inverter(poor lighting, flicker, etc.) never occur. when you confirm it, the module should be operated in the same co ndition as it is installed in your instrument. note (1) lamp current is measured with current meter for high frequency as shown below. refer to the block diagram of the back-light unit in the next page for more information. specified values are for a single lamp. lcd module inverter (sk1700a) a hot (pink) cold (white) hot (blue) cold (black) hot (pink) cold (white) hot (blue) cold (black) (2) lamp frequency which may produce interference with horizontal synchronous frequency may cause line flow on the display. therefore lamp frequency should be detached from the horizontal synchronous frequency and its har monics as far as possible in order to avoid interference. (3) life time (hr) of a lamp is defined as the tim e in which it continues to operate under the condition of ta = 252c and i l = 6.5marms for a lamp until the brightness becomes 50% or lower than its original value. operating cond ition is lamp unit itself, not module assembly at operating current 6.5ma. www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval (4) if an inverter has shutdown function, it should keep its output for over 1 second even if the lamp connector is open. otherwise the lamps may not be turned on. (5) because the inverter use s high voltage, please disconnect it from the power before assembling or disassembling. (6) the output of the inverter must have symmet rical(negative and pos itive) voltage waveform and current waveform. please do not use the inverter which has unsymmetrical voltage and current and spike wave. designing a system inverter intended to have better display performance, power efficiency and lamp reliability, ple ase follow the requirements the below. they would help increase the lamp lifetime and reduce leakage current. a. the asymmetry rate of the inverter waveform should be less than 10%. b. the distortion rate of the waveform should be within 2 2 ? 10%. * inverter output waveform had bette r be more similar to ideal sine wave. i p i -p * asymmetry rate: | i p ?i ?p | / i rms x 100% * distortion rate i p (or i ?p ) / i rms i p i -p i p i -p * asymmetry rate: | i p ?i ?p | / i rms x 100% * distortion rate i p (or i ?p ) / i rms www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 4. block diagram 4.1 tft lcd module dc power supply timing controller lcd drive analog circuit data driver(column) tft-lcd lvds ds90c 386 gate driver (row) lvds signals odd even input connector 4.2 back-light unit connector : yeonho 35001hs-02l or equivalent lamp(ccfl) cold(white) hot(pink) 1 2 lamp(ccfl) cold(black) hot(blue) 3 4 lamp(ccfl) cold(white) hot(pink) 1 2 lamp(ccfl) cold(black) hot(blue) 3 4 www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 5. input terminal pin assignment 5.1. input signal & power ( connector : uju in-30-ob100 or equivalent ) pin no symbol function 1 rxo0- negative transmission data of pixel 0 (odd data) 2 rxo0+ positive transmission data of pixel 0 (odd data) 3 rxo1- negative transmission data of pixel 1 (odd data) 4 rxo1+ positive transmission data of pixel 1 (odd data) 5 rxo2- negative transmission data of pixel 2 (odd data) 6 rxo2+ positive transmission data of pixel 2 (odd data) 7 gnd power ground 8 rxoc- negative sampling clock (odd data) 9 rxoc+ positive sampling clock (odd data) 10 rxo3- negative transmission data of pixel 3 (odd data) 11 rxo3+ positive transmission data of pixel 3 (odd data) 12 rxe0- negative transmission data of pixel 0 (even data) 13 rxe0+ positive transmission data of pixel 0 (even data) 14 gnd power ground 15 rxe1- negative transmission data of pixel 1 (even data) 16 rxe1+ positive transmission data of pixel 1 (even data) 17 gnd power ground 18 rxe2- negative transmission data of pixel 2 (even data) 19 rxe2+ positive transmission data of pixel 2 (even data) 20 rxec- negative sampling clock (even data) 21 rxec+ positive sampling clock (even data) 22 rxe3- negative transmission data of pixel 3 (even data) 23 rxe3+ positive transmission data of pixel 3 (even data) 24 gnd power ground 25 *ce for lcd internal use only. do not connect 26 *ctl for lcd internal use only. do not connect 27 nc no connection. 28 v dd power supply : +5v 29 30 note ) refer to page 30 for the 1st pin of interface connector marked with . * if the system already uses the 25, 26pins, it should keep under gnd level. the voltage applied to those pins should not exceed -200mv. www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 5.2 lvds interface(1) 5.2.1 odd pixel data (1st pixel data) 1st lvds transmitter ( ds90c383, ds90c385 ) signal interface device input pin device input signal output signal to ltm170e8 interface ( cn101 ) no symbol symbol function terminal symbol 51 txin0 ro0 red odd pixel data (lsb) txout0- txout0+ no. 1 no. 2 rxo0- rxo0+ 52 txin1 ro1 red odd pixel data 54 txin2 ro2 red odd pixel data 55 txin3 ro3 red odd pixel data 56 txin4 ro4 red odd pixel data 2 txin5 ro7 red odd pixel data (msb) txout3- txout3+ no. 10 no. 11 rxo3- rxo3+ 3 txin6 ro5 red odd pixel data txout0- txout0+ no. 1 no. 2 rxo0- rxo0+ 4 txin7 go0 green odd pixel data (lsb) 6 txin8 go1 green odd pixel data txout1- txout1+ no. 3 no. 4 rxo1- rxo1+ 7 txin9 go2 green odd pixel data 8 txin10 go6 green odd pixel data txout3- txout3+ no. 10 no. 11 rxo3- rxo3+ 10 txin11 go7 green odd pixel data (msb) 11 txin12 go3 green odd pixel data txout1- txout1+ no. 3 no. 4 rxo1- rxo1+ 12 txin13 go4 green odd pixel data 14 txin14 go5 green odd pixel data 15 txin15 bo0 blue odd pixel data (lsb) 16 txin16 bo6 blue odd pixel data txout3- txout3+ no. 10 no. 11 rxo3- rxo3+ 18 txin17 bo7 blue odd pixel data (msb) 19 txin18 bo1 blue odd pixel data txout1- txout1+ no. 3 no. 4 rxo1- rxo1+ 20 txin19 bo2 blue odd pixel data txout2- txout2+ no. 5 no. 6 rxo2- rxo2+ 22 txin20 bo3 blue odd pixel data 23 txin21 bo4 blue odd pixel data 24 txin22 bo5 blue odd pixel data 50 txin27 ro6 red odd pixel data txout3- txout3+ no. 10 no. 11 rxo3- rxo3+ www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 5.2.2 even pixel data (2nd pixel data) 2nd lvds transmitter ( ds90c383, ds90c385 ) signal interface device input pin device input signal output signal to ltm170e8 interface ( cn101 ) no symbol symbol function terminal symbol 51 txin0 re0 redevenpixeldata(lsb) txout0- txout0+ no. 12 no. 13 rxe0- rxe0+ 52 txin1 re1 redevenpixeldata 54 txin2 re2 redevenpixeldata 55 txin3 re3 redevenpixeldata 56 txin4 re4 redevenpixeldata 2 txin5 re7 redevenpixeldata(msb) txout3- txout3+ no. 22 no. 23 rxe3- rxe3+ 3 txin6 re5 redevenpixeldata txout0- txout0+ no. 12 no. 13 rxe0- rxe0+ 4 txin7 ge0 greenevenpixeldata(lsb) 6 txin8 ge1 greenevenpixeldata txout1- txout1+ no. 15 no. 16 rxe1- rxe1+ 7 txin9 ge2 greenevenpixeldata 8 txin10 ge6 greenevenpixeldata txout3- txout3+ no. 22 no. 23 rxe3- rxe3+ 10 txin11 ge7 greenevenpixeldata(msb) 11 txin12 ge3 greenevenpixeldata txout1- txout1+ no. 15 no. 16 rxe1- rxe1+ 12 txin13 ge4 greenevenpixeldata 14 txin14 ge5 greenevenpixeldata 15 txin15 be0 blue even pixel data (lsb) 16 txin16 be6 blue even pixel data txout3- txout3+ no. 22 no. 23 rxe3- rxe3+ 18 txin17 be7 blue even pixel data (msb) 19 txin18 be1 blue even pixel data txout1- txout1+ no. 15 no. 16 rxe1- rxe1+ 20 txin19 be2 blue even pixel data txout2- txout2+ no. 18 no. 19 rxe2- rxe2+ 22 txin20 be3 blue even pixel data 23 txin21 be4 blue even pixel data 24 txin22 be5 blue even pixel data 50 txin27 re6 redevenpixeldata txout3- txout3+ no. 22 no. 23 rxe3- rxe3+ www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 5.3 lvds interface (2) 5.3.1 odd pixel data (1st pixel data) lvds transmitter ( ds90c387 ) signal interface device input pin device input signal output signal to ltm170e8 interface ( cn101 ) no symbol symbol function terminal symbol 10 r10 ro0 red odd pixel data (lsb) a0m a0p no. 1 no. 2 rxo0- rxo0+ 9 r11 ro1 red odd pixel data 8 r12 ro2 red odd pixel data 7 r13 ro3 red odd pixel data 6 r14 ro4 red odd pixel data 3 r17 ro7 red odd pixel data (msb) a3m a3p no. 10 no. 11 rxo3- rxo3+ 5 r15 ro5 red odd pixel data a0m a0p no. 1 no. 2 rxo0- rxo0+ 2 g10 go0 green odd pixel data (lsb) 1 g11 go1 green odd pixel data a1m a1p no. 3 no. 4 rxo1- rxo1+ 100 g12 go2 green odd pixel data 94 g16 go6 green odd pixel data a3m a3p no. 10 no. 11 rxo3- rxo3+ 93 g17 go7 green odd pixel data (msb) 99 g13 go3 green odd pixel data a1m a1p no. 3 no. 4 rxo1- rxo1+ 96 g14 go4 green odd pixel data 95 g15 go5 green odd pixel data 92 b10 bo0 blue odd pixel data (lsb) 86 b16 bo6 blue odd pixel data a3m a3p no. 10 no. 11 rxo3- rxo3+ 85 b17 bo7 blue odd pixel data (msb) 91 b11 bo1 blue odd pixel data a1m a1p no. 3 no. 4 rxo1- rxo1+ 90 b12 bo2 blue odd pixel data a2m a2p no. 5 no. 6 rxo2- rxo2+ 89 b13 bo3 blue odd pixel data 88 b14 bo4 blue odd pixel data 87 b15 bo5 blue odd pixel data 4 r16 ro6 red odd pixel data a3m a3p no. 10 no. 11 rxo3- rxo3+ www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 5.3.2 even pixel data (2nd pixel data) lvds transmitter ( ds90c387 ) signal interface device input pin device input signal output signal to ltm170e8 interface ( cn101 ) no symbol symbol function terminal symbol 84 r20 re0 redevenpixeldata(lsb) a4m a4p no. 12 no. 13 rxe0- rxe0+ 81 r21 re1 redevenpixeldata 80 r22 re2 redevenpixeldata 79 r23 re3 redevenpixeldata 78 r24 re4 redevenpixeldata 75 r27 re7 redevenpixeldata(msb) a7m a7p no. 22 no. 23 rxe3- rxe3+ 77 r25 re5 redevenpixeldata a4m a4p no. 12 no. 13 rxe0- rxe0+ 74 g20 ge0 greenevenpixeldata(lsb) 73 g21 ge1 greenevenpixeldata a5m a5p no. 15 no. 16 rxe1- rxe1+ 72 g22 ge2 greenevenpixeldata 66 g26 ge6 greenevenpixeldata a7m a7p no. 22 no. 23 rxe3- rxe3+ 65 g27 ge7 greenevenpixeldata(msb) 71 g23 ge3 greenevenpixeldata a5m a5p no. 15 no. 16 rxe1- rxe1+ 70 g24 ge4 greenevenpixeldata 69 g25 ge5 greenevenpixeldata 64 b20 be0 blue even pixel data (lsb) 58 b26 be6 blue even pixel data a7m a7p no. 22 no. 23 rxe3- rxe3+ 57 b27 be7 blue even pixel data (msb) 63 b21 be1 blue even pixel data a5m a5p no. 15 no. 16 rxe1- rxe1+ 62 b22 be2 blue even pixel data a6m a6p no. 18 no. 19 rxe2- rxe2+ 61 b23 be3 blue even pixel data 60 b24 be4 blue even pixel data 59 b25 be5 blue even pixel data 76 r26 re6 redevenpixeldata a7m a7p no. 22 no. 23 rxe3- rxe3+ note) mustbeconnected24thbalpinwithlowand23thdualpinwithhighinds90c387lvds transmitter www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 5.4 back-light unit pin no. input color function upper 1 hot1 pink high voltage 2 cold1 white ground 3 hot2 blue high voltage 4 cold2 black ground lower 1 hot1 pink high voltage 2 cold1 white ground 3 hot2 blue high voltage 4 cold2 black ground connector part no. yeonho 35001hs-02l or equivalent www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 5.5 input signals, basic display colors and gray scale of each color color display data signal gray scale level red green blue r0 r1 r2 r3 r4 r5 r6 r7 g0 g1 g2 g3 g4 g5 g6 g7 b0 b1 b2 b3 b4 b5 b6 b7 basic color black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - blue 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 - green 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 - cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 - red 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 - magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 - yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 - white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 - gray scale of red black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 r0 dark ? - light 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 r1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 r2 : : : : : : : : : : : : : : : : : : : : : : : : r3~ r252 : : : : : : : : : : : : : : : : : : : : : : : : 1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 r253 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 r254 red 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 r255 gray scale of green black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 g0 dark ? - light 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 g1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 g2 : : : : : : : : : : : : : : : : : : : : : : : : g3~ g252 : : : : : : : : : : : : : : : : : : : : : : : : 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 g253 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 g254 green 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 g255 gray scale of blue black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 b0 dark ? - light 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 b1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 b2 : : : : : : : : : : : : : : : : : : : : : : : : b3~ b252 : : : : : : : : : : : : : : : : : : : : : : : : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 b253 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 b254 blue 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 b255 note) definition of gray : rn : red gray, gn : green gray, bn : blue gray (n = gray level) input signal : 0 = low level voltage, 1 = high level voltage www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 6. interface timing 6.1 timing parameters ( de only mode ) signal item symbol min. typ. max. unit note clock frequency 1/t c 38.1 54 68.4 mhz (1), (2) high time t ch 4 - - nsec low time t cl 4 - - nsec data setup time t ds 4 - - nsec hold time t dh 4 - - nsec data enable setup time t es 4 - - nsec frame frequency cycle tv 18.2 16.7 13.1 msec 1032 1066 1066 lines frequency 1/tv 55 60 76 hz (3) vertical active display term display period t vd 1024 1024 1024 lines vertical blank period t vb 8 - - lines one line scanning time cycle t h 672 - 844 clocks horizontal active display term display period t hd 640 640 640 clocks note (1) test point : ttl control signal and clk at lvds tx input terminal in system (2) internal vcc = 3.3v (3) at low vsync frequency, under 60hz, flicker level can increase at specific pattern. www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 6.2 timing diagrams of interface signal ( de only mode ) data signals de t vd t v t h dclk t c de t hd t vb 0.5 v cc t es t ds t dh t ch t cl t c de display data dclk 0.5 v cc 0.5 v cc www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 6.3 power on/off sequence to prevent a latch-up or dc operation of the lcd module, the power on/off sequence should be as the diagram below. power supply v dd 0.9 v dd 0.9 v dd 0v 0 v valid signals t 3 300 k? t 1 ? 10msec 0 ? t 2 ? 50 msec 0 ? t 3 ? 50 msec 1sec ? t 4 t 1 t 2 t 4 0.1 v dd 0.1 v dd back-light(recommended) 500 msec ? t 5 100 msec ? t 6 power on power off t 5 t 6 50% 50% power supply v dd 0.9 v dd 0.9 v dd 0v 0 v valid signals t 3 300 k? t 1 ? 10msec 0 ? t 2 ? 50 msec 0 ? t 3 ? 50 msec 1sec ? t 4 t 1 t 2 t 4 0.1 v dd 0.1 v dd back-light(recommended) 500 msec ? t 5 100 msec ? t 6 power on power off t 5 t 6 50% 50% power on/off sequence note. (1) the supply voltage of the external system for the module input should be the same as the definition of v dd . (2) apply the lamp voltage within the lcd operation range. when the back-light turns on before the lcd operation or the lcd turns off before the back-light turns off, the display may momentarily show abnormal screen. (3) in case of v dd =offlevel, please keep the level of input signals low or keep a high impedance. (4) t4 should be measured after the module has been fully discharged between power off and on period. (5) interface signal should not be kept at high impedance when the power is on. www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 6.4 v dd power dip condition 4.5v ? v dd ? 5.5v if v dd (typ) x 20% ? vcc ? v dd (typ) x 10%, then, 0

doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 6.5 lvds input characteristics 6.5.1 lvds receiver input symbol parameter conditions min typ max unit note v th lvds input high threshold v cmlvds = 1.25v +100 mv v tl lvds input low threshold -100 mv v cmlvds lvds input common mode voltage 1.125 1.25 1.375 v i in input current v in =2.4v/0v v dd =3.6v -10 +10 u t skew skew between lvds clock & lvds data -200 0 200 psec (1) note (1) lvds skew v diff = 0v t skew1 differential differential lvds clk lvds data rx+/- t v diff = 0v v diff = 0v t skew1 differential differential lvds clk lvds data rx+/- t v diff = 0v where t skew : skew between lvds clock & lvds data, t : 1 period time of lvds clock cf) (-/+) of 200psec means lvds data goes before or after lvds clock. www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 6.5.2 rsds output symbol parameter conditions min typ max unit v ohdif output differential high voltage r l = 100 ? pii = 13k ? 150 170 200 mv v oldif output differential low voltage -200 170 150 mv v cm rsds output common voltage 1.0 1.2 1.4 v r l rsds output load impedance 50 100 110 ? www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 7. outline dimension [ refer to the next page ] www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 8. reliability test test items conditions time/cycle sample htol* 50 c,bias 500 hrs 12 ltol* 0 c,bias 500 hrs 5 thb** 40 c / 95% , bias 500 hrs 5 hts*** 70 c,nobias 500 hrs 5 lts*** -30 c,nobias 500 hrs 5 thermal cycle -20 c/30min ~ +60 c/30min , no bias 100 cycle 5 box drop 1 angle , 3 edge , 6 side , 66 cm 5 shock (non-operating) 50g , 11msec sine wave , x/y/z axis 1 time/axis 3 vibration (non-operating) 1.5g , 10~300 hz x/y/z axis , sweep rate : 10 min 30min/axis 3 esd operating contact : 150pf, 330 ? , 100points, once/point 8kv 3 air(non-contact) : 150pf, 330 ? , 100points, once/point 15kv 3 non- operating cdm : 150pf , 330 ? , 9points, 3times/point 10kv 3 [ result evaluation criteria] under the display quality test conditions with normal operation state, these should be no change which may affect practical display functions. * htol/ ltol : high/low temperature operating life, ** thb : temperature humidity bias *** hts/lts : high/low temperature storage www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 9. packing 9.1 carton (internal package) (1) packing form corrugated fiberboard box and eps cushion as shock absorber (2) packing method a) without inverter shielding-bag packing-case label-safety opp-tape panel-protector both sided tape tape-paper(4 point) box label $64)*0/1"% note)1)total:approx.10 b 2) acceptance number of piling : 5sets 3) carton size : 390(w) x 320(d) x 470(h) 4) max accumulation quantity : 5 cartons www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval (3) packing material no part name quality 1 static electric protective sack 5 2 packing case(inner box) included shock absorber 1set 3 pictorial marking 2pics 4 carton 1set 10. marking & others a nameplate bearing followed by is affixed to a shipped product at the specified location on each product. (1) parts number : LTM170E8-L01-xxx (2) revision code : two letters (3) customer code : one letter xxx revision code customer code (4) lot number : 6 q 4 d 00111c lot number month year device line (5) nameplate indication week code : 0452 week year 80mm 40mm xxx LTM170E8-L01 6q4d00111c ppid added www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval (6) packing box attach xxx parts number revision code box serial number 40mm 80mm LTM170E8-L01 (7) others 1. after service part : none (lamps cannot be replaced because of the narrow bezel structure.) www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 11. inspection criteria when products are shipped, incoming inspection should be carried out with a sampling inspection based on mil-std-105e level ii by aql 1.0%. change control design of the product may be changed regarding the specifications, appearance, parts used, circuits, etc. for product improvement. if a design change is judged to affect the specifications of this product, supplier should inform customer of the change in advance. quality control in the event of a product failure under norma l operating conditions, a product trouble or a functional disorder that can be deemed to be the responsibility of supplier, supplier should repair the fault or replace the product free of charge within one year from the product delivery date. however, supplier does not take responsibility for the product quality in the case of modifications not specified by supplier. maintenance the specifications of the functions of maintenance parts may be partially changed within the range which provides equivalent or better quality. in principle, maintenance parts should be product units. when stopping manufacturing this product, supplier should notify customer in advance. handling of doubtful points any doubt not stipulated in this specification is to be resolved by mutual agreement between customer and supplier, and supplier should make efforts for improvement in good faith. www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 12. general precautions 12.1 handling (a) when the module is assembled, it should be attached to the system firmly using all mounting holes. be careful not to twist and bend the module. (b) because the inverter use high voltage, it should be disconnected from power before it is assembled or disassembled. (c) refrain from strong mechanical shock and / or any force to the module. in addition to damage, this may cause improper operation or damage to the module and ccft back-light. (d) note that polarizers are very fragile and could be damage deasily. do not press or scratch the surface harder than a hb pencil lead. (e) wipe off water droplets or oil immediately. if you leave the droplets for a long time, staining or discoloration may occur. (f) if the surface of the polarizer is dirty, clean it using some absorbent cotton or soft cloth. (g) desirable cleaners are water, ipa(isopropyl alcohol) or hexane. do not use ketone type materials(ex. acet one), ethyl alcohol, toluene, ethyl acid or methyl chloride. it might permanent damage to the polarizer due to chemical reaction. (h) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth . in case of contact with hands, legs or clothes, it must be washed away with soap thoroughly. (i) protect the module from static, or the cmos gate array ic would be damaged. (j) use finger-stalls with soft gloves in order to keep display clean during the incoming inspection and assembly process. (k) do not disassemble the module. (l) do not pull or fold the lamp wire. (m) do not adjust the variable resistor located on the module. (n) protection film for polarizer on the module should be slowly peeled off just before use so that the electrostatic charge can be minimized. (o) pins of i/f connector should not be touched directly with bare hands. www.datasheet.co.kr datasheet pdf - http://www..net/
doc . no LTM170E8-L01 rev.no 04-e00-g-050217 page /38 approval 12.2 storage (a) do not leave the module in high temperature, and high humidity for a long time. it is highly recommended to store the module with temperature from 0 to 35 ? and relative humidity of less than 70%. (b) do not store the tft-lcd module in direct sunlight. (c) the module should be stored in a dark place. it is prohibited to apply sunlight or fluorescent light in storing. 12.3 operation (a) do not connect or disconnect the module in the "power on" condition. (b) power supply should always be turned on/off by the item 6.3 "power on/off sequence" (c) module has high frequency circuits. sufficient suppression to the electromagnetic interference should be done by system manufacturers. grounding and shielding methods may be important to minimize the interference. (d) the cable between the back-light connector and its inverter power supply should be connected directly with a minimized length. a longer cable between the back-light and the inverter may cause lower luminance of lamp(ccft) and may require higher startup voltage(vs). 12.4 others (a) ultra-violet ray filter is necessary for outdoor operation. (b) avoid condensation of water. it may result in improper operation or disconnection of electrode. (c) do not exceed the absolute maximum rating value. ( supply voltage variation, input voltage variation, variation in part contents and environmental temperature, andsoon) otherwise the module may be damaged. (d) if the module keeps displaying the same pattern for a long period of time, the image may be "sticked" to the screen. to avoid image sticking, it is recommended to use a screen saver. (e) this module has its circuitry pcb's on the rear side and should be handled carefully in order not to be stressed. (f) please contact sec in advance when you display the same pattern for a long time. www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of LTM170E8-L01

	To Download LTM170E8-L01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .